FRP pipe winding equipment

FRP pipe winding equipment 

Glass fiber reinforced plastic pipe winding equipment Main equipment: Two sets of mixing tank, lining machine, winding machine, four sets of curing station, dressing machine (with a set of diamond sharpener), small gantry stripping machine, Production of sand pipe pipeline layout.

The main parameters:
A system lining machine main parameters:
1, making product diameter: Φ300mm-Φ800mm
2, the effective length of production products: 12000mm
3, lining machine made up of the following parts:
4, supporting mold front and rear bearings and spindle drive system
5, platform rail and chain drive system
6, lining car
7, car positioning wheel
8, film, mesh cloth tensioner
9, lining lining plastic device
10, curing agent pump
11, electrical control system
12, the resin is stirred two winding machine
13, winding product diameter: Φ 300 mm-Φ800mm
14, the effective length of wound products: ≥ 12000mm adjustable
15, Yarn accuracy: ± 1mm
16, winding angle: 30 ° -90 °
17, the control mode: computer control, manual, semi-automatic, automatic
18, Drawing speed: ≥ 120m / min
19, yarn width: ≥ 200mm
20, winding equipment productivity: 1T / h
21, resin pump plastic feeding capacity: winding up to 30kg or more / min, falling sand can reach 60kg / min.
Second, curing station.


Curing station main parameters (single):
22, installed capacity: 3 ~ 17KW
23, product diameter: Φ300mm-Φ800mm
24, the effective length of the product: 12000mm


Curing station consists of the following components:
25, before and after supporting the mold bearing and spindle drive system
26, electrical control system
27, simple heating pipe device
three. Small gantry stripping machine
28, installed capacity: 5 ~ 10KW
29, product diameter: Φ800mm-Φ300mm
30, the effective length of the product: 12000mm
31, gantry and hydraulic system
32, hosting car
33, care model
34, drawing the car
35, rapid die-pulling system
36, electrical control system
Fourth, finishing machine:
Finishing machine main parameters:
37, installed capacity: 10KW
38, product diameter: Φ800mm-Φ300mm
39, product effective length: 12000mm


Finishing machine mainly consists of the following components:
40, before and after supporting the mandrel bearing and spindle drive system
41, jack trimming agencies
42, bearing the first body
43, electrical control system
44, water dust removal equipment

Glass fiber reinforced plastic pipe winding equipment Main equipment: Two sets of mixing tank, lining machine, winding machine, four sets of curing station, dressing machine (with a set of diamond sharpener), small gantry stripping machine, Production of sand pipe pipeline layout.
top